Bơm Speroni KPM 50
TRẠNG THÁI: Hàng mới 100%
Giá bán: Vui lòng liên hệ
Danh mục: Bơm Speroni (Italy)
Download tài liệu: Download file
Gọi lại cho tôi
APPLICATION
Volumetric water pumps able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves. They are qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities.
Volumetric water pumps able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves. They are qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities.
Technical data
Capacity:
m3/h = 2.1 - l/m = 35
Total head :
H(m) = 34
Power:
kW = 0,37
Voltage:
230V-50Hz
Features
OPERATING CONDITIONS
- Liquid temperature up to 60°C
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
MOTOR
- Two-Pole induction motor
(n = 2850 min-1)
- Insulation Class F
- Protection IP 44
MATERIALS
- Pump body: Cast Iron
- Motor support: Cast Iron
- Impeller: Brass
- Shaft with rotor: Stainless SteelAISI 304
- Mechanical seal: Ceramic/Graphite/NBR
- Liquid temperature up to 60°C
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
MOTOR
- Two-Pole induction motor
(n = 2850 min-1)
- Insulation Class F
- Protection IP 44
MATERIALS
- Pump body: Cast Iron
- Motor support: Cast Iron
- Impeller: Brass
- Shaft with rotor: Stainless SteelAISI 304
- Mechanical seal: Ceramic/Graphite/NBR
Other products in category
Technical data
Capacity:
m3/h = 2.1 - l/m = 35
Total head :
H(m) = 34
Power:
kW = 0,37
Voltage:
230V-50Hz
Features
OPERATING CONDITIONS
- Liquid temperature up to 60°C
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
MOTOR
- Two-Pole induction motor
(n = 2850 min-1)
- Insulation Class F
- Protection IP 44
MATERIALS
- Pump body: Cast Iron
- Motor support: Cast Iron
- Impeller: Brass
- Shaft with rotor: Stainless SteelAISI 304
- Mechanical seal: Ceramic/Graphite/NBR
- Liquid temperature up to 60°C
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
MOTOR
- Two-Pole induction motor
(n = 2850 min-1)
- Insulation Class F
- Protection IP 44
MATERIALS
- Pump body: Cast Iron
- Motor support: Cast Iron
- Impeller: Brass
- Shaft with rotor: Stainless SteelAISI 304
- Mechanical seal: Ceramic/Graphite/NBR
Gọi điện
Tin nhắn