Bơm nước thải lắp đặt khô KRT

TRẠNG THÁI: Hàng mới 100%

Giá bán: Vui lòng liên hệ

Danh mục: Bơm KSB (Đức)

Gọi lại cho tôi

Design
Vertical, single-stage submersible motor pump made of wear-resistant industrial materials in close-coupled design, various impeller types, for wet or dry installation, stationary and transportable version. Design to ATEX.
Applications
Handling of all types of abrasive or aggressive waste water in water and waste water engineering as well as industry, especially untreated sewage containing long fibres and solid substances, fluids containing gas / air, as well as raw, activated and digested sludge; sea water desalination.

Overview of technical data
Type of impeller Open; Multi-vane impeller;Radial;Closed;Free flow impeller
Type of installation Close- coupled
Maximum drive rating 200 kW
Impeller material (EN standard) JN 3029; 1.4517
Type of bearing Rolling element bearings
Drive frequency 50 Hz / 60 Hz
Maximum speed of rotation 3. 500 1/min
Maximum flow rate 2. 400 m³/h
Maximum discharge-side pressure 10 bar
Casing material (EN standard) 1. 4517;JN 3029
No. of impeller entries Single entry
Casing material White cast iron; Cast duplex steel
Suction characteristics Non- priming
Drive voltage Low voltage
eClass assignment 36410103; 36410101
Pump set location Wet well
Explosion protection ATEX II 2 G T3; ATEX II 2 G T4
Max. permissible fluid temperature 60 002
Free passage 120 mm
Main applications Water; Oil / Gas;Energy;Industry and process engineering;Mining / Dredges;Waste water / sewage
Type of installation Stationary; Transportable
Type of casing Volute casing
Type of connection Flange
Type of lubrication Oil lubrication
Type of drive Electric motor
Installation position Vertical
Shaft material (EN standard) 1. 4462;C45+N
Type of coupling None
Shaft seal type Mechanical seal
Drive Electric motor
Maximum head 100, 00 m
Maximum rated pressure (discharge) PN 16
Nozzle position End suction
Casing partition Radially split
Connection to power supply < 690 V, 3~